The Enviro-Cone is MUTCD Compliant, 80% recycled by weight, made from low-density polyethylene, recyclable when damaged or destroyed, and provides superior all-weather performance and increased life span compared to PVC Cones.
The Retractable Cone Bar improves safety in your work zone by creating a visual and physical pedestrian barrier. The retractable bar is made of durable ABS plastic and wrapped in reflective sheeting for increased nighttime visibility.
Stable, Stackable, and Highly Visible. Rugged and easily storable cones offering safety day or night. Each 7lb or 10lb TrafFix PVC Cone is Injection Molded, MUTCD Compliant, 28 inches in height, are fluorescent orange for superior fade resistance.
The TrafFix Spring Cone & Tote System is an ideal solution for temporary traffic control with its compact design for easy storage on any truck or vehicle trunk. The Spring Cone meets Federal MUTCD requirements for 28″ reflective highway traffic cones.
Durable, injection molded Clip-On Signs provide safety information to pedestrians and drivers and easily inserts into traffic cones or delineator poss and cones.
TrafFix Stop/Slow Paddles are made from strong, non-corrosive material. Available in reflective and non-reflective surfaces.
Enviro-Cone® Traffic Cone
Buy Enviro-Cone
The Enviro-Cone is the future of traffic cones:
MUTCD Compliant, 80% recycled by weight, and can easily be recycled again if the cone is damaged or destroyed. This saves you money and helps to keep more plastic from entering our landfills. If a cone stem becomes unusable, simply reorder the stem and reuse the base, no need to buy the entire cone again! No more land fills loaded with toxic PVC cones!
With its patented Easy Grip Groove handle, the Enviro-Cone provides excellent “gription” for quick deployment and retrieval. This grove makes tying off caution tape a breeze and is 100% compatible with the TrafFix Retractable Cone Bar. The Enviro-Cone is the ideal construction cone for road construction projects,
Visibility on the roadway is an important feature of any traffic safety cone, and the Enviro-Cone has broader surface area for cones of similar height and weight. The wide-body construction of the Enviro-Cone has 42% greater target value than Slim Line Cones during daylight hours, and 34% at night. This design increases visibility without increasing the weight of the cone. A larger cone is a greater “threat” to drivers and represents potential damage to their car. With this greater visibility, the driver has more time to slow down and avoid a collision, which saves lives and prevents damage to the work-zone.
Cold Test
Heat Test
Stability Improvement
Tipping Point Comparison
PVC Cone vs. Enviro-Cone
7 lb. PVC Cone
Angle
45°
Weight
7 lb. (3.18 kg)
Distribution
Base: 60%
Stem: 40%
Part No.
15028-HIWB-C7
10 lb. PVC Cone
Angle
55°
Weight
10 lb. (4.54 kg)
Distribution
Base: 60%
Stem: 40%
Part No.
15028-HIWB-C10
7 lb. Enviro-Cone
Angle
76°
Weight
7 lb. (3.18 kg)
Distribution
Base: 80%
Stem: 20%
Part No.
16028-HIWB-7
Every day, millions of traffic cones are used in construction and work zones around the globe. In windy conditions, these cones may blow over and need be put back into service by a work crew. Resetting these cones requires time in a potentially dangerous area and takes time away from getting the job done. Because of its revolutionary design, 80% of the weight of the Enviro-Cone is in its base. This gives the Enviro-Cone a lower center of gravity and thus a better tipping point compared to any 7 or 10lb (3.18 or 4.53 kg) PVC traffic cones available on the market.
In 2015, the TrafFix Devices Engineering Team conducted a wind tunnel test to demonstrate that the Enviro-Cone was more stable in windy conditions than traditional PVC traffic cones of similar weight and size. The certified wind tunnel used for the testing is equipped with a 30′ (9.14 m) wide propeller and can produce wind speeds up to 270 mph (434.5 km/h) in precise wind velocities. When tested against similar PVC traffic cones, the Enviro-Cone was the decisive winner while the PVC cones were blown out of service.
Stability
Visibility
Long Term Durability
Unlike standard PVC construction cones, the Enviro-Cone is designed to withstand an impact with the tires of most vehicles on the road.With the Enviro-Cone there is ripped or torn PVC! Simply reshape the Enviro-Cone stem with your hands and then…… drop the base over the reformed cone stem and the Enviro-Cone is ready to be put back on the job; saving you time and money.
Specification
Orange/Lime traffic cone is 18″, 28″, or 36″ (45.72, 71.12, or 91.44 cm) in height and has a total weight of 3, 7, 10, or 12 lbs. ± ¼ lb. (1.36, 3.18, 4.54, 5.44 kg. ± 0.113 kg.). Stem of the cone is molded from LDPE to provide superior cold/hot weather performance, excellent 100% UV resistance/color retention, and superior impact performance. Base of the cone is molded from recyclable rubber and makes up 80% of the total weight. Dimensions of the base are 15 ¾” × 15 ¾” (40 × 40 cm). The cone base is removable so that the stem can be replaced if either part becomes damaged. The cone base will lock onto the cone stem with molded-in locking lugs. The stem of the cone is designed with recessed areas for reflective collars and a groove near the top of the cone for easy “gription”. Tipping angle of the cone is no less than 76° from vertical. The entire Enviro-Cone product, cone stem and base, is made in the USA.
Four (4) 28″ Enviro-Cone traffic cones with Two (2) Black and Yellow 4′ – 6.5′ Retractable Cone Bar (#15046A-CBYB)
Improve safety in your work zone by creating a visual and physical pedestrian barrier with the Retractable Cone Bar and a series of Enviro-Cones. The retractable bar is made of durable ABS plastic and wrapped in reflective sheeting for nighttime visibility. Each end of the retractable bar has a rugged 3¼” (8.26 cm) loop that easily drops over any traffic cones or delineator posts.
Construction barrels are traffic control devices used to channel motor vehicles through construction sites. Construction barrels are typically bright orange and have four alternating white and orange reflective bands.
Please note our Barrel Rubber Bases are sold separately to prevent the Barrel from tipping over during high winds or when struck by a vehicle. Eco-Friendly from 100% recycled tires
Impact Resistant
Molded from impact resistant polyethylene. Available in low or high density configurations.
Minimal Vehicle Damage
Minimizes and remains serviceable after numerous impacts.
Tested and Certified
Meets or exceeds MUTCD Specification and is tested & certified to meet requirements of NCHRP-350 Crash Worthiness.
TrafFix Looper-Tube®46000 Series
TrafFix Devices’ Looper-Tubes come in a height of 42 inches and are ballasted by 12 and 18 lb. Recycled Rubber Bases. Simply drop the Recycled Rubber Base over the tube stem and you’re ready to go to work.
The stem of the Looper-Tubes are made of flexible yet durable fluorescent low density polyethylene material, with UV inhibitors to minimize fading. The recessed areas on the stem protect the reflective bands, minimizing rips and scratches. The extra large flange at the bottom of the stem allows the rubber base to hold it firmly in place.
Features
The Looper-Tube measures 42 inches in height
Made of flexible low density polyethylene
Bright orange color molded throughout
UV inhibitors to minimize fading
Grabber handle patented design allows for easy movement
Available with various size and types of reflective sheeting
Bases will not crush when run over
Meets Federal MUTCD standards
Parades/crowd control
Narrow work areas
Water/flood control
Lane closures
Tree trimming
Channelize or delineate traffic
Barricade construction work zones
Vehicular or pedestrian traffic control
Parking lot traffic control, striping or resurfacing
Trimline Design
Highly visible 42″ trimline channelizer ideal for controlling traffic in areas of limited space & can be fitted with a barricade light for maximum visibility
